PATCH, PLUG, & REPAIR
Umaco products have been widely used and trusted by Professional Contractors for over 50 years. Umaco manufactures a full line of concrete patching and repair products, masonry waterproofing products, acrylic admixtures & bonding agents, flooring underlayments & resurfacers, decorative masonry & concrete coatings, stucco systems and polyurethane coatings.
U-Patch: A fast-setting (6-10 minutes), cement-based, non-shrink material designed to repair all types of vertical and horizontal concrete and masonry surfaces. Designed to be mixed with Add Mix-21.
U-Plug: A fast-setting (5-10 minutes), non-shrink, hydraulic cement designed to instantly stop running water from seeping through holes and cracks found in masonry and concrete.
Mortar Joint Repair: A siliconized, water-based, acrylic sealant caulk (gray in color) designed to repair cracks in mortar joints and other cementitious surface. Easy to apply with a standard caulk gun.
U-Plug: A fast-setting (5-10 minutes), non-shrink, hydraulic cement designed to instantly stop running water from seeping through holes and cracks found in masonry and concrete.
Mortar Joint Repair: A siliconized, water-based, acrylic sealant caulk (gray in color) designed to repair cracks in mortar joints and other cementitious surface. Easy to apply with a standard caulk gun.
For over 75 years Mapei has been a worldwide leader in Concrete Restoration Systems. Their products help repair damaged concrete in commercial and industrial projects as well as infrastructure settings such as bridges and wastewater systems.
Planitop® X: A one-component, fiber-reinforced, shrinkage-compensated, high-early-strength, fast-setting, polymer-modified, high-build cementitious repair mortar with a corrosion inhibitor.
Planitop® XS: Extended set time cementitious repair mortar.
Planitop® 18: high early strength repair mortar suited for all interior/exterior horizontal concrete repairs, including bridge decks, parking-garage floors, and various horizontal DOT (Department of Transportation) concrete repairs.
Planigrout 712®: High-Performance, Nonshrink, DOT Grout.
Planiseal Plug®: Ultra quick setting mortar specially designed for stopping leaks, for repairing voids and pockets in concrete, and for anchoring.
Concrete Renew Fine®: A one component, polymer-modified cementitious material for the resurfacing of existing concrete.
Planibond 3C (Part A,B, and C): A three-component, cementitious, moisture-tolerant, epoxy-modified corrosion inhibitor and bonding agent. Can be on all exposed reinforcing steel and as a bonding agent before the placement of repair products.
Planitop® XS: Extended set time cementitious repair mortar.
Planitop® 18: high early strength repair mortar suited for all interior/exterior horizontal concrete repairs, including bridge decks, parking-garage floors, and various horizontal DOT (Department of Transportation) concrete repairs.
Planigrout 712®: High-Performance, Nonshrink, DOT Grout.
Planiseal Plug®: Ultra quick setting mortar specially designed for stopping leaks, for repairing voids and pockets in concrete, and for anchoring.
Concrete Renew Fine®: A one component, polymer-modified cementitious material for the resurfacing of existing concrete.
Planibond 3C (Part A,B, and C): A three-component, cementitious, moisture-tolerant, epoxy-modified corrosion inhibitor and bonding agent. Can be on all exposed reinforcing steel and as a bonding agent before the placement of repair products.
Conproco has over 30 years of experience in developing innovative products to cater to concrete and stone repair and preservation, protective coatings, water repellents, and exterior wall systems.
Conproco One Shot: Trowel applied, single component, polymer modified, Portland cement material for horizontal applications up to 1/2 inch.
Conpro-Set: Trowel applied, single component, polymer modified cementitious repair mortar with ECB-Tech corrosion protection.
Decor Seal: A cementious base coating that offer protection for interior or exterior, above or below-grade vertical concrete and masonry substrates that experience water entry through walls.
Structural Skin: Trowel or spray applied, fiber reinforced, cement based structural coating for exterior wall systems over block, concrete, brick, exterior sheathing and plywood.
Conproco Stucco: High comprehensive strength Portland cement stucco for a natural appearing, decorative texture coating on concrete, masonry and curtain wall construction.
Mimic: Single component moldable repair mortar for natural stone, cast stone and terracotta. Different color options available to match existing stone.
Conpro-Set: Trowel applied, single component, polymer modified cementitious repair mortar with ECB-Tech corrosion protection.
Decor Seal: A cementious base coating that offer protection for interior or exterior, above or below-grade vertical concrete and masonry substrates that experience water entry through walls.
Structural Skin: Trowel or spray applied, fiber reinforced, cement based structural coating for exterior wall systems over block, concrete, brick, exterior sheathing and plywood.
Conproco Stucco: High comprehensive strength Portland cement stucco for a natural appearing, decorative texture coating on concrete, masonry and curtain wall construction.
Mimic: Single component moldable repair mortar for natural stone, cast stone and terracotta. Different color options available to match existing stone.
SILPRO is a leader in flooring preparation and concrete/masonry repair products. We use only the most skilled professionals, finest materials and innovative techniques.
Easy Plug: Silpro Easy Plug Hydraulic Cement is a cementitious material formulated to set rapidly (3 to 5 minutes) to patch cracks and holes. It is particularly effective in stopping the flow of water permanently. Use it indoors or outdoors, above or below grade. 60 second formulation available.
Silpro Repair VOH: One-component, fiber reinforced, rapid-setting repair mortar for structural vertical and overhead applications. SilproRepair VOH is freeze/thaw resistant and contains an integral corrosion inhibitor. Due its rapid-set, SilproRepair VOH can be placed and sculpted to proper shape in one application for thicknesses up to 2 inches. Extended set formulation available.
TDQ: Silrp TDQ Thin Deep Quick Repair is a one component, high-quality, cement-based, multi-purpose repair material.
Mascrete: A polymer-modified, Portland cement-based mortar used for patching, resurfacing, and leveling floors, or as an underlayment for any floor covering. The specially formulated Mascrete® powder is mixed on the job with Silpro C-21 All Acrylic® admix. Mascrete® provides a tough, resilient surface that is highly resistant to abrasion and impact, and can withstand extreme fluctuations of temperature. Use it indoors or outdoors, above or below grade, and in areas that may become totally submerged.
Silpro 220: A high performance, general-purpose, Calcium Aluminate cement-based, polymer-modified self-leveling underlayment. Silflo ® 220 is recommended for resurfacing and leveling interior concrete, wood, cement terrazzo, quarry, and ceramic tile floors prior to the installation of resilient flooring, ceramic tile, wood flooring, laminate, or carpet.
California Stucco: A Portland cement-based, water-resistant coating that is easy to apply and has the ability to withstand severe climatic conditions. It combines a great variety of textures with low maintenance cost in a permanent finish material. Available in white or gray.
Silpro Repair VOH: One-component, fiber reinforced, rapid-setting repair mortar for structural vertical and overhead applications. SilproRepair VOH is freeze/thaw resistant and contains an integral corrosion inhibitor. Due its rapid-set, SilproRepair VOH can be placed and sculpted to proper shape in one application for thicknesses up to 2 inches. Extended set formulation available.
TDQ: Silrp TDQ Thin Deep Quick Repair is a one component, high-quality, cement-based, multi-purpose repair material.
Mascrete: A polymer-modified, Portland cement-based mortar used for patching, resurfacing, and leveling floors, or as an underlayment for any floor covering. The specially formulated Mascrete® powder is mixed on the job with Silpro C-21 All Acrylic® admix. Mascrete® provides a tough, resilient surface that is highly resistant to abrasion and impact, and can withstand extreme fluctuations of temperature. Use it indoors or outdoors, above or below grade, and in areas that may become totally submerged.
Silpro 220: A high performance, general-purpose, Calcium Aluminate cement-based, polymer-modified self-leveling underlayment. Silflo ® 220 is recommended for resurfacing and leveling interior concrete, wood, cement terrazzo, quarry, and ceramic tile floors prior to the installation of resilient flooring, ceramic tile, wood flooring, laminate, or carpet.
California Stucco: A Portland cement-based, water-resistant coating that is easy to apply and has the ability to withstand severe climatic conditions. It combines a great variety of textures with low maintenance cost in a permanent finish material. Available in white or gray.
