geo-grid
TLC carries a full line of Geo-Textiles manufactured by SRW Products
Geo Grid
is used as a tie back system to hold retaining walls, usually at heights over 4 ft ( depending on wall system ) it is installed to act as a tie back, disrupt and disperse the angular slide of the material being retained. Depending on several factors height of wall, weight of block being used determines the strength, distance and placement of the Geo-Grid.
When (MSE) walls are not a feasible option, a reinforced slope can be considered. While native soils restrict the angle of construction, SRW Geogrids could allow for a less than 1:1 slope soil structure.
Other applications for SRW Geogrids:
- Waste Containment
- Void Bridging
- Reinforced embankments over soft soil
- Base course stabilization
- Erosion control
- Landscape repairs
Geo-Textile Fabric
is used under all type of pavers, using this fabric under you base material prevents any shifting and settling it stabilizes and transfer the point load placed on the paver project to eliminate the effect of poor sub-base material. The use of this fabric is a must in driveway installations.
